June 23th - June 27th 2008
Noordwijk, The Netherlands
| COSI 2008 June 23th - June 27th 2008 Noordwijk, The Netherlands |
|
| 4th Coatings Science International 2008 | |||
        
|
Speakers 2008 |
||
|
|
|||
| Ingo Alig | Deutsches Kunststoff-Institut, Darmstadt, Germany | Scanning acoustic microscopy for investigation of coatings | |
| Natalya Baklanova | Institute of Solid State Chemistry and Mechanochemistry SB RAS, Russian Federation | Research and development of nanosized interfacial coatings on small diameter carbon and SiC Fibers for composite materials | |
| José Brokken-Zijp | Eindhoven University of Technology, The Netherlands | Polymer composites with (semi)-conductive nano-fillers | |
| Horst Hintze Bruening | BASF Coatings AG, Muenster, Germany | Layered particle based polymer composites for coatings: Part II – Coatings morphology and mechanical properties | |
| Fabiola Brusciotti | Vrije Universiteit Brussel (VUB), Brussels, Belgium | Characterization of hybrid organic / silicon based coatings deposited by wet and plasma deposition methods | |
| Pascal Buskens | DSM Research, Geleen, The Netherlands | State of the art single layer anti-reflective coatings | |
| Tessa ten Cate | TNO Science and Industry, Eindhoven, The Netherlands | Tailored surface properties using polymer brush coatings | |
| Yoshiki Chujo | Kyoto University, Japan | Organic-inorganic polymer nano-hybrid materials | |
| Guillermo J. Cruz |
Departamento de Física, Instituto Nacional de Investigaciones Nucleares, Apdo. México.
|
Metallic layers added by plasma on polyethylene | |
| Joost van Dijk | AkzoNobel, The Netherlands | Pushing polyurethane crosslinking beyond its speed limit | |
| Alexander Fedorov | Department of Applied Physics, Netherlands Institute for Metals, University of Groningen, The Netherlands | Degradation of adhesion in deformed polymer-metal interfaces studied by laser induced delamination technique | |
| Adolphe Foyet | Eindhoven University of Technology, The Netherlands | Permeability and corrosion performance of epoxy-coated aerospace alloy evaluated by electrochemical impedance spectroscopy | |
| Nathalie De Geyter | Ghent University – Faculty of Engineering – Department of Applied Physics – Research Unit Plasma Technology (RUPT) – Gent – Belgium | Deposition of hydrophobic coatings on polymer films using a dielectric barrier discharge | |
| Bernd Göbelt | Byk-Chemie GmbH, Wesel, Germany | Flat panel display: tuning the developing properties of the color resist | |
| Guido Grundmeier | University of Paderborn, Faculty of Science, Department of Chemistry - Chemical Engineering, Paderborn, Germany |
Structure and stability of
polymer/oxide/metal interfaces Bridging the gap between interface analysis and advanced surface technologies |
|
| Gerhard Jonschker | Merck KGaA, Germany, F Darmstadt, Germany | New monodispersed core/shell nanoparticles for improving scratch resistance of coatings | |
| Eun-Hee Kim | School of Nano & Advanced Materials Engineering, Changwon National University,Changwon, Korea | Polyhedral oligomeric silsesquioxane reinforced polyurethane acrylate | |
| Ralf Knischka | Ciba Specialty Chemicals Inc. Coatings Effects Segment, Basel, Switserland | Novel approaches in NIR curing technology | |
| Ria Kress | BASF Coatings AG, Munster, Germany | Innovative production process for pigmented powder coatings | |
| Baoshun Liu | Key Laboratory of Silicate Materials Science and Engineering, Ministry of Education, China, Wuhan University of Technology, Wuhan City, Hubei Province, P.R. China | Efficent degradation of aqueous methyl orange over TiO2 and CdS electrodes using photoelectrocatalysis under UV and visible light irradiation | |
| Jonathan W. Martin | National Institute of Standards and Technology (NIST) Gaithersburg, MD 20889, USA | Linking field and laboratory exposure and predicting long-term performance of an epoxy coatings | |
| Ralf Posner | University of Paderborn, Faculty of Science, Department of Chemistry - Chemical Engineering, Paderborn, Germany |
Structure and stability of
polymer/oxide/metal interfaces Bridging the gap between interface analysis and advanced surface technologies |
|
| Patrice Roose | Cytec Surface Specialties, Drogenbos, Belgium | Radiation curing: An attractive technology for metal coating | |
| Masaaki Saika | SR Institute, Kansai Paint Co. LTD. Hiratsuka-shi, Kanagawa, Japan | CO2 Emission reducible coatings based on modified corn-starch | |
| Masamitsu Shirai | Osaka Prefecture University, Department of Applied Chemistry, Osaka, Japan | i-Line sensitive photoacid generators for UV curing | |
| Per Aggerholm Sørenson | Department of Chemical Engineering, Technical University of Denmark, Building 229, DK-2800 Kgs. Lyngby, Denmark | Influence of substrate characteristics on cathodic delamination of anticorrosive coatings | |
| Ananda kumar Srinivasan | Department of Chemistry, Anna University, Chennai – India | Development and characterization of phosphorus containing siliconized epoxy resin coatings | |
| Per-Erik Sundell | SSAB Tunnplat AB, Sweden | UV-cured coil coatings - product performance and outdoor durability | |
| Stacy M. Trey | Dept. of Fiber and Polymer Technology, The Royal Institute of Technology, Stockholm, Sweden | Effect of residual stress build-up and cure shrinkage in UV cured acrylate resins on adhesion to SMC substrates | |
| Anne-Lise Troutier | University of Blaise Pascal, France | Layered particle based polymer composite for coatings: Part I – Evaluation of inorganic layered particles | |
| Björn Weber | University Paderborn, Germany | Creating new materials with melamine resins | |
| Dean C. Webster | Department of Coatings and Polymeric Materials, North Dakota State University, 1735 NDSU Research Park Drive, Fargo, ND 58105 USA | Hybrid sol-gel coatings from glycidyl carbamate functional resins | |
| Mariëlle Wouters | TNO Science & Industry, Eindhoven, The Netherlands | Preparation and properties of a novel remendable coating concept | |
| Mikhail L. Zheludkevich | DECV/CICECO, Universidade de Aveiro, Aveiro, Portugal | LDH-based nanocontainers as anticorrosive pigments for protective coatings | |
| Thomas Zwieg | Larsen Strings A/S, Sonderborg, Denmark | Optimisation of tone quality or timbre of musical strings for bowed instruments | |
  |
|||
