COSI Proceedings

The Proceedings of Coatings Science International Conferences have been published as a special issue of Progress in Organic Coatings.

COSI 2008 / POC 64 [2-3](2009)

  1. G. de With and R.A.T.M. van Benthem, Editorial POC CoSi 2008 , POC 64 [2-3] (2009) 109-111
  2. I. Alig, S. Tadjbach, P. Krüger, H. Oehler and D. Lellinger, Characterization of coating systems by scanning acoustic microscopy: Debonding, blistering and surface topology, POC 64 [2-3] (2009) 112-119
  3. B. Liu, L. Wen and X. Zhao, Efficient degradation of aqueous methyl orange over TiO2 and CdS electrodes using photoelectrocatalysis under UV and visible light irradiation, POC 64 [2-3] (2009) 120-123
  4. T. Iwamura, K. Adachi, M. Sakaguchi and Y. Chujo, Synthesis of organic—inorganic polymer hybrids from poly(vinyl chloride) and polyhedral oligomeric silsesquioxane via CH/π interaction, POC 64 [2-3] (2009)124-127
  5. D.K. Chattopadhyay, A.D. Zakula and D.C. Webster, Organic—inorganic hybrid coatings prepared from glycidyl carbamate resin, 3-aminopropyl trimethoxy silane and tetraethoxyorthosilicate, POC 64 [2-3] (2009)128-137
  6. A. Foyet, T.H. Wu, L. van der Ven, A. Kodentsov, G. de With and R. van Benthem, Influence of mixing ratio on the permeability of water and the corrosion performance of epoxy/amine coated un-pretreated Al-2024 evaluated by impedance spectroscopy, POC 64 [2-3] (2009) 138-141
  7. P.A. Sørensen, S. Kiil, K. Dam-Johansen and C.E. Weinell, Influence of substrate topography on cathodic delamination of anticorrosive coatings, POC 64 [2-3] (2009) 142-149
  8. A.. Weber, W. Bremser and K. Hiltrop, Creating new materials with melamine resins, POC 64 [2-3] (2009) 150-155
  9. M. Wouters, E. Craenmehr, K. Tempelaars, H. Fischer, N. Stroeks and J. van Zanten, Preparation and properties of a novel remendable coating concept , POC 64 [2-3] (2009)156-162
  10. P. Roose, I. Fallais, C. Vandermiers, M.-G. Olivier and M. Poelman, Radiation curing technology: An attractive technology for metal coating , POC 64 [2-3] (2009) 163-170
  11. R. Knischka, U. Lehmann, U. Stadler, M. Mamak and J. Benkhoff, Novel approaches in NIR curing technology, POC 64 [2-3] (2009) 171-174
  12. M. Shirai and H. Okamura, i-Line sensitive photoacid generators for UV curing, POC 64 [2-3] (2009) 175-181
  13. A.-L. Troutier-Thuilliez, C. Taviot-Guého, J. Cellier, H. Hintze-Bruening and F. Leroux, Layered particle-based polymer composites for coatings: Part I. Evaluation of layered double hydroxides, POC 64 [2-3] (2009)182-192
  14. H. Hintze-Bruening, A.-L. Troutier-Thuilliez and F. Leroux, Layered particle-based polymer composites for coatings: Part II–Stone chip resistant automotive coatings, POC 64 [2-3] (2009)193-204
  15. E.H. Kim, S.W. Myoung, Y.G. Jung and U. Paik, Polyhedral oligomeric silsesquioxane-reinforced polyurethane acrylate, POC 64 [2-3] (2009) 205-209
  16. A. Fedorov, W.-P. Vellinga and J. De Hosson, Gas permeation and temperature effects in laser-induced delamination, POC 64 [2-3] (2009) 210-215
  17. N. Baklanova, L. Zhilitskaya and A. Titov, Organometallic polymer-derived interfacial coatings on carbon and SiC fibers, POC 64 [2-3] (2009)216-220
  18. A.T. ten Cate, S.A.F. Reinders, D.H. Turkenburg, A. Bruin, F. D´Souza, G.T. Donnelly, P.R. Willemsen, J.H. Maas and K.J.C. van Bommel, High density hydrophilic and hydrophobic brush coatings using a polymeric primer layer, POC 64 [2-3] (2009) 221-224
  19. G.J. Cruz, M.G. Olayo, E. Colin, J.C. Palacios, R. López, E. Granda, A. Muñoz and R. Valencia Metallic layers added by plasma on polyethylene, POC 64 [2-3] (2009) 225-229
  20. N. De Geyter, R. Morent, S. Van Vlierberghe, P. Dubruel, C. Leys, L. Gengembre, E. Schacht and E. Payen , Deposition of polymethyl methacrylate on polypropylene substrates using an atmospheric pressure dielectric barrier discharge, POC 64 [2-3] (2009) 230-237
  21. S.M. Trey, M. Lundström, D. Ståhlberg and M. Johansson, Effects of thiol additives on urethane acrylate UV primers for SMC applications, POC 64 [2-3] (2009) 238-246
  22. M. Barletta, A. Gisario, G. Rubino and L. Lusvarghi, Influence of scratch load and speed in scratch tests of bilayer powder coatings, POC 64 [2-3] (2009)247-258
  23. A.E. Muñoz-Castro, R. López-Callejas, E.E. Granda-Gutiérrez, R. Valencia-Alvarado, S.R. Barocio, R. Peña-Eguiluz, A. Mercado-Cabrera and A. de la Piedad Beneitez, Ion implantation of oxygen and nitrogen in CpTi, POC 64 [2-3] (2009)259-263
  24. C. Fei, Z. Hai, C. Chen and X. Yangjian, Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation, POC 64 [2-3] (2009)264-267
  25. J. Feng, J. Han and X. Zhao, Synthesis of CuInS2 quantum dots on TiO2 porous films by solvothermal method for absorption layer of solar cells, POC 64 [2-3] (2009)268-273
  26. J.-P. Kim, E.-H. Kim, J.-H. Lee, Y.-G. Jung, N.-H. Kim, S.-C. Choi and U. Paik, Damage resistance of SiC and Si3 N4 coatings with control of microstructure and thickness, POC 64 [2-3] (2009) 274-280
  27. M.T. Kim, D.S. Kim and O.Y. Oh, In situ deposition of oxide layer using fuel additive and its effect on the oxidation of SM 45C blades for micro-gas turbines , POC 64 [2-3] (2009) 281-286
  28. A. Kirchner and J. Houweling, Measuring flake orientation for metallic coatings, POC 64 [2-3] (2009 )287-293
  29. K. Lachmann, S. Eckert, A. Vogel, A. Klinger, A. Gebert and C.-P. Klages, Development of a multifunctional coating system for laser-induced material transport, POC 64 [2-3] (2009) 294-299
  30. X. Lou, X. Zhao, J. Feng and X. Zhou, Electrochromic properties of Al doped B-subsituted NiO films prepared by sol–gel, POC 64 [2-3] (2009) 300-303
  31. R. Morent, N. De Geyter, S. Van Vlierberghe, P. Dubruel, C. Leys, L. Gengembre, E. Schacht and E. Payen, Deposition of HMDSO-based coatings on PET substrates using an atmospheric pressure dielectric barrier discharge, POC 64 [2-3] (2009) 304-310
  32. S.-W. Myoung, S.-I. Jung, E.-H. Kim, Y.-G. Jung, Y.-S. Nam and W.-S. Kyoung, Fabrication and characterization of eco-friendly functional wallpaper using nonmetallic minerals, POC 64 [2-3] (2009) 311-316
  33. J. Ni, Q. Zhao and X. Zhao, Transparent and high infrared reflection film having sandwich structure of SiO2 /Al:ZnO/SiO2 , POC 64 [2-3] (2009) 317-321
  34. E. Colín, M.G. Olayo, G.J. Cruz, L. Carapia, J. Morales and R. Olayo, Affinity of amine-functionalized plasma polymers with ionic solutions similar to those in the human body, POC 64 [2-3] (2009) 322-326

COSI 2007 / POC 61 [2-4](2008)

  1. G. de With and R.A.T.M. van Benthem, Editorial POC CoSi 2007, POC 61 [2-4] (2008) 103-105
  2. M. Groenewolt, Highly scratch resistant coatings for automotive applications, POC 61 [2-4] (2008) 106-109
  3. K.J. van den Berg, L.G.J. van der Ven and H.J.W. van den Haak, Development of waterborne UV-A curable clear coat for car refinishes, POC 61 [2-4] (2008) 110-118
  4. K. Studer, P. Nesvadba, T. Jung, J. Benkhoff, K. Powell and C. Lordelot, Novel curing agents: Thermal radical initiators as viable alternatives to peroxides, POC 61 [2-4] (2008) 119-125
  5. J. Mallégol, M. Poelman and M.-G. Olivier, Influence of UV weathering on corrosion resistance of prepainted steel, POC 61 [2-4] (2008) 126-135
  6. S.G. Croll, X. Shi and B.M.D. Fernando, The interplay of physical aging and degradation during weathering for two crosslinked coatings, POC 61 [2-4] (2008) 136-144
  7. M. Špírková, J. Brus, L. Brozová, A. Strachota, J. Baldrian, M. Urbanovà, J. Kotek, B. Strachotová and M. Šlouf, A view from inside onto the surface of self-assembled nanocomposite coatings, POC 61 [2-4] (2008) 145-155
  8. J.M. Stubbs and D.C. Sundberg, The dynamics of morphology development in multiphase latex particles, POC 61 [2-4] (2008) 156-165
  9. I. Alig, D. Lellinger, H. Oehler, S.A. A. damovsky and C. Schick, Microcalorimetry for characterization of film formation and cure of coatings and adhesives, POC 61 [2-4] (2008) 166-175
  10. R. Bao and S. Jönsson, Using a new approach to analyze a depth profile of double bond conversion in model formulations, POC 61 [2-4] (2008) 176-180
  11. A. Brun, H. Dihang and L. Brunel, Film formation of coatings studied by diffusing–wave spectroscopy, POC 61 [2-4] (2008) 181-191
  12. A.P. Kharitonov, Direct fluorination of polymers–From fundamental research to industrial applications, POC 61 [2-4] (2008) 192-204
  13. M. Hara, S. Yamakawa, M. Saito, S. Tobe and T. Inaba, Bonding adhesive strength for plasma spray with cathode spots of low–pressure arc after grit blasting and removal of oxide layer on metal surface, POC 61 [2-4] (2008) 205-210
  14. E. Jaehne, S. Oberoi and H.-J.P. Adler, Ultra thin layers as new concepts for corrosion inhibition and adhesion promotion, POC 61 [2-4] (2008) 211-223
  15. W.J. Soer, W. Ming, C.E. Koning and R.A.T.M. van Benthem, Towards anti-corrosion coatings from surfactant-free latexes based on maleic anhydride containing polymers, POC 61 [2-4] (2008) 224-232
  16. D. de la Fuente and M. Rohwerder, Fundamental investigation on the stability of the steel/coating interfaces contaminated by submicroscopic salt particles, POC 61 [2-4] (2008) 233-239
  17. M. Dornbusch, The use of modern electrochemical methods in the development of corrosion protective coatings, POC 61 [2-4] (2008) 240-244
  18. I.-S. Bae, S.-J. Cho, W.S. Choi, H.J. Cho, B. Hong, H.-D. Jeong and J.-H. Boo, Characterization on polymerized thin films for low-k insulator using PECVD, POC 61 [2-4] (2008) 245-248
  19. M. Barletta, G. Rubino, L. Lusvarghi and F. Pighetti Mantini, Surface appearance and mechanical strength of multi-layer polymeric films, POC 61 [2-4] (2008) 249-261
  20. M. Barletta, G. Bolelli, A. Gisario and L. Lusvarghi, Mechanical strength and wear resistance of protective coatings applied by fluidized bed (FB), POC 61 [2-4] (2008) 262-282
  21. B. Chico, J. Simancas, J.M. Vega, N. Granizo, I. Díaz, D. de la Fuente and M. Morcillo, Anticorrosive behaviour of alkyd paints formulated with ion-exchange pigments, POC 61 [2-4] (2008) 283-290
  22. J.–H. Kang, H.–M. Cha, J.–H. Lee, Y.–G. Jung, H.–S. Lee and V.K. Srivastava, Synthesis and characterization of non–oxide ceramic coatings on graphite substrates by solid–vapor reaction process, POC 61 [2-4] (2008) 291-299
  23. J.–Y. Kwon, K.–H. Dong, J.–H. Lee, Y.–G. Jung, U. Paik and C.–Y. Jo, Anisotropic mechanical properties and contact damage in air-plasma-sprayed thermal barrier coatings with bond coating nature and thermal exposure condition, POC 61 [2-4] (2008) 300–307
  24. M. Lonyuk, M. Bosma, C.A.M. Vijverberg, A. Bakker and M. Janssen, Relation between chip resistance and mechanical properties of automotive coatings, POC 61 [2-4] (2008) 308-315
  25. S.–W. Myoung, S.–H. Park, P.–H. Lee, Y.–G. Jung, D. Joo, K.–H. Lee, H.–S. Lee and U. Paik, Phase transformation and oxidation behavior of Pt–modified MCrAlY coatings, POC 61 [2-4] (2008) 316-320
  26. Z. Yi, C. Guofeng, W. Ma and W. Wei, Effect of external bias voltage and coating thickness on the photocatalytic activity of thermal sprayed TiO2 coating, POC 61 [2-4] (2008) 321-325
  27. Z. Ziari, A. Bellel, S. Sahli, Y. Segui and P. Raynaud, A comparative study on the effect of VUV radiation in plasma SiOx-coated polyimide and polypropylene films, POC 61 [2-4] (2008) 326-332

COSI 2006 / POC 58 [2-3](2007)

  1. G. de With and R.A.T.M. van Benthem, Editorial, POC 58 [2-3] (2007) 77-79
  2. T. Nabuurs, S. van der Slot and A. Overbeek, Nanomorphology control in aqueous coatings, POC 58 [2-3] (2007) 80-86
  3. N. Fedullo, E. Sorlier, M. Sclavons, C. Bailly, J.-M. Lefebvre and J. Devaux, Polymer-based nanocomposites: Overview, applications and perspectives, POC 58 [2-3] (2007) 87-95
  4. M.L. Nobel, S.J. Picken and E. Mendes, Waterborne nanocomposite resins for automotive coating applications, POC 58 [2-3] (2007) 96-104
  5. A. Pucci, G. Ruggeri, S. Bronco, M. Bertoldo, C. Cappelli and F. Ciardelli, Conferring dichroic properties and optical responsiveness to polyolefins through organic chromophores and metal nanoparticles, POC 58 [2-3] (2007) 105-116
  6. L.G.J. van der Ven, R.T.M. Leijzer, K.J. van den Berg, P. Ganguli and R. Lagendijk, Interactions between basecoats and clearcoats in car refinish systems, POC 58 [2-3] (2007) 117
  7. P. Uhlmann, R. Frenzel, B. Voit, U. Mock, B. Szyszka, B. Schmidt, D. Ondratschek, J. Gochermann and K. Roths, Research agenda surface technology: Future demands for research in the field of coatings materials, POC 58 [2-3] (2007) 122-126
  8. S.V. Lamaka, M.L. Zheludkevich, K.A. Yasakau, R. Serra, S.K. Poznyak and M.G.S. Ferreira, Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability, POC 58 [2-3] (2007) 127-135
  9. A. Seth, W.J. van Ooij, P. Puomi, Z. Yin, A. Ashirgade, S. Bafna and C. Shivane, Novel, one-step, chromate-free coatings containing anticorrosion pigments for metals–An overview and mechanistic study, POC 58 [2-3] (2007) 136-145
  10. K. Dietliker, R. Hüsler, J.–L. Birbaum, S. Ilg, S. Villeneuve, K. Studer, T. Jung, J. Benkhoff, H. Kura, A. Matsumoto and H. Oka, Advancements in photoinitiators–Opening up new applications for radiation curing, POC 58 [2-3] (2007) 146-157
  11. M. Shirai, Reworkable UV curing materials, POC 58 [2-3] (2007) 158-165
  12. J.F. Jacobs, G.J.M. Koper and W.N.J. Ursem, UV protective coatings: A botanical approach, POC 58 [2-3] (2007) 166-171
  13. D. Maetens, Weathering degradation mechanism in polyester powder coatings, POC 58 [2-3] (2007) 172-179
  14. A.V. Fedorov, R. van Tijum, W.–P. Vellinga and J.Th.M. De Hosson, Degradation and recovery of adhesion properties of deformed metal–polymer interfaces studied by laser induced delamination, POC 58 [2-3] (2007) 180-186
  15. M. Fermeglia and S. Pricl, Multiscale modeling for polymer systems of industrial interest, POC 58 [2-3] (2007) 187-199
  16. I. Alig, H. Oehler, D. Lellinger and S. Tadjbach, Monitoring of film formation, curing and ageing of coatings by an ultrasonic reflection method, POC 58 [2-3] (2007) 200-208
  17. A.M. Rhoades, D.A. Wicks, B. Miriyala and J. Williamson, Interactions of an antimicrobial peptide (Ac-RRWWRF-NH2) and surfactants: Towards antimicrobial peptide additives for coatings applications, POC 58 [2-3] (2007) 209-216
  18. J.T. Huybrechts and L.M. Tanghe. 2.1 VOC solvent borne 2K clear coats based on star oligoethers, POC 58 [2-3] (2007) 217-227
  19. H. Sasaki, Curing properties of cycloaliphatic epoxy derivatives, POC 58 [2-3] (2007) 227-230
  20. W. Posthumus, A.J. Derksen, J.A.M. van den Goorbergh and L.C.J. Hesselmans, Crosslinking by polycarbodiimides, POC 58 [2-3] (2007) 231-236
  21. D. Hegemann, M.M. Hossain and D.J. Balazs, Nanostructured plasma coatings to obtain multifunctional textile surfaces, POC 58 [2-3] (2007) 237-240
  22. M. Lonyuk, M. Bosma, A.C. Riemslag, J. Zuidema, A. Bakker and M. Janssen, Stone-impact damage of automotive coatings: A laboratory single-impact tester, POC 58 [2-3] (2007) 241-247
  23. R. Serra, M.L. Zheludkevich and M.G.S. Ferreira, Surface modification of coil coatings with thin plasma polymer films structure and stability, POC 58 [2-3] (2007) 248-252

COSI 2005 / POC 55 [2](2006)

  1. B. de With and R.A.T.M. van Benthem, Editorial, POC 55 [2] (2006) 71-74
  2. S.G. Croll, B.R. Hinderliter and S. Liu, Statistical approaches for predicting weathering degradation and service life, POC 55 [2] (2006)75-87
  3. I. Alig, P.A.M. Steeman, D. Lellinger, A.A. Dias and D. Wienke, Polymerization and network formation of UV-curable materials monitored by hyphenated real-time ultrasound reflectometry and near-infrared spectroscopy (RT-US/NIRS), POC 55 [2] (2006) 88-96
  4. M. Bosma, R. Brinkhuis, J. Coopmans and B. Reuvers, The role of sag control agents in optimizing the sag/leveling balance and a new powerful tool to study this, POC 55 [2] (2006) 97-104
  5. S.J.F. Erich, J. Laven, L. Pel, H.P. Huinink and K. Kopinga, NMR depth profiling of drying alkyd coatings with different catalysts, POC 55 [2] (2006) 105-111
  6. D. Ståhlberg, P. Junestam, M. Johansson and E.K. Gamstedt, Relaxation properties of particle filled coatings: Experimental study and modelling of a screw joint, POC 55 [2] (2006) 112-118
  7. P.J.A. Geurink, T. Scherer, R. Buter, A. Steenbergen and H. Henderiks, A complete new design for waterborne 2-pack PUR coatings with robust application properties, POC 55 [2] (2006) 119-127
  8. M. Tielemans, P. Roose, P. De Groote and J.-C. Vanovervelt, Colloidal stability of surfactant-free radiation curable polyurethane dispersions, POC 55 [2] (2006) 128-136
  9. K. Rissa, T. Lepistö and K. Yrjölä, Effect of kaolin content on structure and functional properties of water-based coatings, POC 55 [2] (2006) 137-141
  10. L.C.J. Hesselmans, A.J. Derksen and J.A.M. van den Goorbergh, Polycarbodiimide crosslinkers, POC 55 [2] (2006) 142-148
  11. R.P. Klaasen and R.P.C. van der Leeuw, Fast drying cobalt-free high solids alkyd paints, POC 55 [2] (2006) 149-153
  12. B. de Ruiter, A. El-ghayoury, H. Hofmeier, U.S. Schubert and M. Manea, Two-step curing processes for coating application, POC 55 [2] (2006). 154-159
  13. M. Zielecka and E. Bujnowska, Silicone-containing polymer matrices as protective coatings. Properties and applications, POC 55 [2] (2006) 160-167
  14. P. Uhlmann, L. Ionov, N. Houbenov, M. Nitschke, K. Grundke, M. Motornov, S. Minko and M. Stamm, Surface functionalization by smart coatings: Stimuli-responsive binary polymer brushes, POC 55 [2] (2006) 168-174
  15. S. Voccia, S. Gabriel, H. Serwas, R. Jérôme and C. Jérôme, Electrografting of thin polymer films: Three strategies for the tailoring of functional adherent coatings, POC 55 [2] (2006) 175-182
  16. C.S. McDaniel, J. McDaniel, M.E. Wales and J.R. Wild, Enzyme-based additives for paints and coatings, POC 55 [2] (2006) 182-193
  17. B. Göbelt, Molecular weight distribution in living polymerization, POC 55 [2] (2006) 189-193
  18. B.K. Kim, B.U. Ahn, M.H. Lee and S.K. Lee, Design and properties of UV cured polyurethane dispersions, POC 55 [2] (2006) 194-200
  19. J.P. Stropp, U. Wolff, S. Kernaghan, H. Löffler, M. Osterhold and H. Thomas, UV curing systems for automotive refinish applications, POC 55 [2] (2006) 201-205